Statement; Safety Factors - Vevor Vdpyca-50M Installations- Und Bedienungsanleitung

Symbols

1.3. Statement

To keep users under safe working condition and property safety, please follow the instructions
below:
Wrong operation may result in injury or damage;
1
Please install the device in compliance with local laws, regulations and standards;
2
Confirm power voltage and frequency;
3
The device is only used with grounding sockets;
4
Independent switch must be offered with the device.
5

1.4. Safety Factors

The following safety factors need to be considered:
Please read the following warnings before installation;
1
Be sure to check the details that need attention, including safety factors;
2
After reading the installation instructions, be sure to save them for future reference.
3
WARNING
Make sure that the device is installed safely and reliably.
If the device is not secure or not installed, it may cause damage. The minimum support

weight required for installation is 21g/mm².
If the device was installed in a closed area or limited space, please consider the size of

room and ventilation to prevent suffocation caused by refrigerant leakage.
Use a specific wire and fasten it to terminal block so that the connection will prevent
1
pressure from being applied to parts.
Wrong wiring will cause fire. Please connect power wire accurately according to wiring
2
diagram on the manual to avoid burnout of the device or fire.
Be sure to use correct material during installing. Wrong parts or wrong materials may result
3
in fire, electric shock, or falling of the device.
Install on the ground safely, please read installation instructions. Improper installation may
4
result in fire, electric shock, falling of the device, or water leaking.
Use professional tools for doing electrical work. If power supply capacity is insufficient or
5
circuit is not completed, it may cause fire or electric shock.
The device must be grounded. If power supply does not have grounding device, be sure not
6
to connect the device.
The device should be only removed and repaired by professional technician. Improper
7
movement or maintenance of the device may cause water leakage, electric shock, or fire.
Please find a professional technician to do.
Don't unplug or plug power during operation. It may cause fire or electric shock.
8
Meaning
This symbol shows that information is available such as the
CAUTION
operating manual or installation manual.
Description
11