Setup - Options - Display Illumination; Setup - Options - Factory Settings; Setup - Informations - Mbnled Rgb Dmx Power Supply 2G Bedienungsanleitung

RGB DMX POWER SUPPLY 2G
SETUP – OPTIONS – DISPLAY ILLUMINATION
Here you can configure the display backlight illumination. In the mode ALWAYS ON
the LCD display is illuminated continuously.
Select the function with the UP-DOWN buttons and press ENTER to save your
choice. You can leave this mode at any time without saving changes by pressing the
ESC button.
- ALWAYS ON
LCD display continuously illuminated
- AUTO SWITCH OFF
In this mode you can enter a time. After the last keystroke the LCD display is
automatically switched off after the selected time. When pressing a button, the
display backlight is automatically switched on again.
Here you can restore the factory default settings. Press the ENTER button to restore
the factory settings.
Gereric informations:
 Software version
 Software date
 Hardware version
 Hardware date
 RDM identification number
 Operation time counter
rev: 04
SETUP – OPTIONS – FACTORY SETTINGS
SETUP – INFORMATIONS
24 www.mbnled.com