Main Mode - Mbnled Rgb Dmx Power Supply 2G Bedienungsanleitung

RGB DMX POWER SUPPLY 2G
Lower right display:
Various icons
DMX – DMX signal present at the input
MST – Device is in master mode and sends a DMX signal
IR – IR module is activated
IR displayed inverted – an IR signal is received from the remote control
Setup – Access to the setup menu items
DMX Address (1-510)
Manual – Desired colour can be adjusted manually with the buttons
Single – Standalone programs can be selected
Master Mode – Standalone programs can be selected and the DMX signal is sent to
additional devices for sonchronization.
Select main mode:
With the UP-DOWN buttons the main mode is selected. On the right side a little
menu with the main menu items is displayed. By pressing the UP-DOWN buttons you
can select the menu items. When the item is highlighted, the function can be
activated by pressing the ENTER button. When you press the ESC button or if no
button is pressed for 10 seconds, the device will revert to the perviously selected

main mode.

rev: 04
MAIN MODE
17 www.mbnled.com