Setup - Configuration - Overheat Protection; Setup - Configuration - Infrared Input; Setup - Options - Language - Mbnled Rgb Dmx Power Supply 2G Bedienungsanleitung

RGB DMX POWER SUPPLY 2G
SETUP – CONFIGURATION – OVERHEAT PROTECTION
Here you can enable or disable the overheat protection. Select the function with the
UP-DOWN buttons and press ENTER to save your choice. You can leave this mode
at any time without saving changes by pressing the ESC button.
Overheat protection ON: at a temperature over 80° C the device will switch off the
outputs.
As soon as the device has cooled down to 75° C, the outputs are switched on again.
SETUP – CONFIGURATION – INFRARED INPUT
Here you can enable or disable the infrared input. Select the function with the UP-
DOWN buttons and press ENTER to save your choice. You can leave this mode at
any time without saving changes by pressing the ESC button.
Infrared ON: programs can also be controlled via infrared remote control.
Here you can select the display language. Select the desired language with the UP-
DOWN buttons and press ENTER to save your choice. You can leave this mode at
any time without saving changes by pressing the ESC button.
Following languages are available:
 English
 German
 Hungarian
rev: 04
SETUP – OPTIONS – LANGUAGE
23 www.mbnled.com