Decoderwerk 40403 Benutzerhandbuch Seite 24

Commissioning
Polarized direct current drives
The decoder can be used for switching points
◆
with polarized DC drives.
The decoder has four outputs with 2 connections
◆
each, to which DC drives can be connected.
Connect outputs
Switching time
On delivery, the decoder is set to an
◆
operating time of 4 seconds, which is too
long for a coil drive.
The output should therefore be set to a shorter
◆
operating time before connecting a polarized
DC drive.
We recommend a switching time of 400ms.
◆
8