Defender CH-175 Anleitung Seite 2

1
Installation of the holder on the air vent grille
Rotate the holder base
1.1
counterclockwise
in order to open the clips
2
Equipping the smartphone with the metal plate
Remove the protective film
2.1
from the adhesive part
of the plate
The plate can also be glued
2.3
to the smartphone case.
Case must be firm and smooth.
The plate can not be attached
to silicone cases
1.2
Insert the holder into the vent grille so that
the deflector lamella is between the holder clips
ATTENTION!!!
Do not stick the plate over the NFC sensor!
Do not stick the plate on your smartphone
in case it has wireless charging function!
Rotate the holder base
1.3
clockwise to secure
the holder to the deflector
2.2
Stick the plate
on the phone case