BWT ES ECHO Kurzanleitung

Chlorine
Max 4 ppm 7.0 ~ 7.8
EN
DO NOT ENTER THE POOL
WHILE THE ROBOT IS
RUNNING IN THE POOL.
Quick Start Guide
ES ECHO
pH Temp NaCl
Max 4,000 ppm
5 ~ 35°C
For full user manual
please scan
1. Charging
• Fully charge the robot for 5 hours prior to the first cleaning job.
• To ensure battery safety, please keep the charging nodes dry.
You can wipe them with a dry, soft cloth.
2. Download the BWT Robotics App
• Press the power button for 2 seconds to turn on the robot.
• Download the BWT Robotics App in your app store.
• Follow step-by-step instructions to set up your robot.
Note:
• If the Wi-Fi indicator light is flashing, it means it is waiting to
be paired.
• If the Wi-Fi indicator light is solid on, it means it is already
connected to a Wi-Fi network. To reset Wi-Fi, press and
hold the power button for at least 8 seconds until the Wi-Fi
indicator starts flashing again.
• Please turn on Bluetooth and enable location services so that
your phone can detect the robot during the set up process
(Only support 2.4GHz Wi-Fi).
iOS
3. Start Cleaning
• Press the power button for 2 seconds to turn on the robot.
• Tap the power button briefly to select the desired cleaning
mode.
• Once the mode light stays solid, place the robot into the pool
within one minute to start the operation.
Quick Start Guide - ES ECHO
2
Android
[EN]