Herunterladen Diese Seite drucken
Icy Box IB-RD3721HR-CU31 Handbuch
Icy Box IB-RD3721HR-CU31 Handbuch

Icy Box IB-RD3721HR-CU31 Handbuch

Raid gehäuse für 2x 2,5"/3,5" sata hdd/ssd
Manual IB-RD3721HR-CU31
RAID-System for 2x 2.5"/3.5" SATA HDD/SSD
Handbuch IB-RD3721HR-CU31
RAID Gehäuse für 2x 2,5"/3,5" SATA HDD/SSD
loading

Inhaltszusammenfassung für Icy Box IB-RD3721HR-CU31

  • Seite 1 Manual IB-RD3721HR-CU31 RAID-System for 2x 2.5"/3.5" SATA HDD/SSD Handbuch IB-RD3721HR-CU31 RAID Gehäuse für 2x 2,5"/3,5" SATA HDD/SSD...
  • Seite 3 Safety information IB-RD3721HR-CU31 Please read carefully the following information to prevent injuries, damage to material and device as well as data loss: Warning levels Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with.
  • Seite 4 Safety information IB-RD3721HR-CU31 5. Potential data loss Data lost during commissioning IMPORTANT Potentially irreversible data loss • Always comply with the information in the operating instructions/quick installation guide • Exclusively use the product once the specifications have been met •...
  • Seite 5 Sicherheitshinweise IB-RD3721HR-CU31 Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenverlust beachten Sie bitte folgende Hinweise: Warnstufen Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen Hinweis auf Wahrscheinlich- keit, Art und Schwere der Folgen, wenn die Maßnahmen zur Vermeidung der Gefahr nicht befolgt werden.
  • Seite 6 Sicherheitshinweise IB-RD3721HR-CU31 4. Gefahren durch Kleinstteile und Verpackung Erstickungsgefahr WARNUNG Lebensgefahr durch Ersticken oder Verschlucken • Kleinteile, Zubehör für Kinder unzugänglich verwahren • Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen • Kleinteile und Verpackungen nicht in Kinderhände geben 5. Möglicher Datenverlust...
  • Seite 7 Manual IB-RD3721HR-CU31 Package content 1x IB-RD3721HR-CU31 1x USB Type-C to Type-C /A cable, 100 cm  ® ® 1x Screwdriver  10x Screw  1x Tool for RAID DIP switch 1x 12 V / 5 A power adapter  1x Manual  View HDD 1 2.
  • Seite 8 Manual IB-RD3721HR-CU31 Product overview 2-bay 2.5"/3.5" RAID system with features as follows Key features • Supports 2x 2.5"/3.5" HDD/SSD • Host connection USB 3.2 Gen 2 Type-C with up to 10 Gbit/s ® • USB 3.2 Gen 2 Type-A hub with up to 10 Gbit/s •...
  • Seite 9 Manual IB-RD3721HR-CU31 RAID Mode Description RAID 0 Recogizes twice the capacity of the smaller hard drive in two hard drives. Setting: Set the arrow on the knob to “0”. Example: 1000 GB + 120 GB = 240 GB RAID 1 Identified as one minimum capacity hard drive, backed up to another drive at the same time.
  • Seite 10 Manual IB-RD3721HR-CU31 Installation of a 3.5" HDD Press the button to open the hard disk compartment and pull out the hard disk carrier.
  • Seite 11 Manual IB-RD3721HR-CU31 2. Fold up both side fixing brackets. 3. Insert the 3.5" hard disk. The hard disk is locked when both side fixing brackets are folded down.
  • Seite 12 Manual IB-RD3721HR-CU31 4. Slide the carrier together with the hard disk into the enclosure.
  • Seite 13 Manual IB-RD3721HR-CU31 Installation of a 2.5 " HDD/SSD Press the button to open the hard disk compartment and pull out the hard disk carrier.
  • Seite 14 Manual IB-RD3721HR-CU31 2. Insert a 2.5" hard disk. 3. Turn the carrier over and align the four holes of the hard disk with those of the carrier. Now screw the hard disk to the carrier using the screws supplied.
  • Seite 15 Manual IB-RD3721HR-CU31 4. Slide the carrier together with the hard disk into the enclosure.
  • Seite 16 Manual IB-RD3721HR-CU31 Notes Install the hard disks HDD 1 and HDD 2 correctly. 2. Set the DIP switch mode according to user requirements. 3. Be sure to connect the power supply before using the product. 4. When a new HDD is used for the first time, it must be initialized and formatted before the compu- ter can recognize it.
  • Seite 17 Handbuch IB-RD3721HR-CU31 Verpackungsinhalt 1x IB-RD3721HR-CU31 1x USB Type-C zu Type-C /A Kabel, 100 cm  ® ® 1x Schraubendreher  10x Schraube 1x Werkzeug für RAID DIP Schalter 1x 12 V / 5 A Netzteil 1x Handbuch Ansicht HDD 1 2. HDD 2 3.
  • Seite 18 Handbuch IB-RD3721HR-CU31 Produktübersicht RAID Gehäuse für 2x 2,5"/3,5" SATA HDD/SSD Hauptmerkmale • Unterstützt 2x 2,5"/3,5" HDD/SSD • Hostanschluss USB 3.2 Gen 2 Type-C mit bis zu 10 Gbit/s ® • USB 3.2 Gen 2 Type-A Hub mit bis zu 10 Gbit/s •...
  • Seite 19 Handbuch IB-RD3721HR-CU31 RAID-Einstellungen RAID 0 Erkennt die doppelte Kapazität der kleineren Festplatte in zwei Festplatten. Einstellung: Stellen Sie den Pfeil des Drehknopfes auf „0“. umgeschaltet Beispiel: 1000 GB + 120 GB = 240 GB RAID 1 Erkennt ein Festplattenlaufwerk mit minimaler Kapazität, das gleichzeitig auf einem anderen Laufwerk gesichert wird.
  • Seite 20 Handbuch IB-RD3721HR-CU31 Installation einer 3,5" Festplatte Drücken Sie die Taste zum Öffnen des Festplattenfachs und ziehen Sie am Griff den Festplatten- träger heraus.
  • Seite 21 Handbuch IB-RD3721HR-CU31 2. Klappen Sie beide seitlichen Befestigungsleisten hoch. 3. Legen Sie die 3,5" Festplatte ein. Mit dem Herunterklappen beider Befestigungsleisten wird die Festplatte verriegelt.
  • Seite 22 Handbuch IB-RD3721HR-CU31 4. Schieben Sie den Träger mitsamt Festplatte in das Gehäuse ein.
  • Seite 23 Handbuch IB-RD3721HR-CU31 Einbau einer 2,5" Festplatte/SSD Drücken Sie die Taste zum Öffnen des Festplattenfachs und ziehen Sie am Griff den Festplatten- träger heraus.
  • Seite 24 Handbuch IB-RD3721HR-CU31 2. Legen Sie eine 2,5" Festplatte ein. 3. Drehen Sie den Träger um und richten Sie die vier Löcher der Festplatte an denen des Trägers aus. Verschrauben Sie nun die Festplatte mit dem Träger mittels der mitgelieferten Schrauben.
  • Seite 25 Handbuch IB-RD3721HR-CU31 4. Schieben Sie den Träger mitsamt Festplatte in das Gehäuse ein.
  • Seite 26 Handbuch IB-RD3721HR-CU31 Hinweise Installieren Sie die Festplatten HDD 1 und HDD 2 korrekt. 2. Stellen Sie den DIP-Schaltermodus entsprechend den Benutzeranforderungen ein. 3. Schließen Sie vor der Verwendung des Produkts unbedingt die Stromversorgung an. 4. Wenn eine neue Festplatte zum ersten Mal verwendet wird, muss sie initialisiert und formatiert werden, bevor der Computer sie erkennen kann.
  • Seite 28 Nos produits et emballages se recyclent, ne les jetez pas! Trouvez où les déposer sur le site www.quefairedemesdechets.fr © Copyright 2025 by RaidSonic Technology GmbH. All Rights Reserved. The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual.