FIT BIKE RIDE 6 IPLUS Benutzeranweisungen Seite 17

Ride 6 iplus
F1: Excellent recovery
o
F6: Poor recovery
o
Score is based on how much your heart rate drops in 1 minute:
Less than 10 bpm: F6
o
10–19 bpm: F5
o
20–29 bpm: F4
o
30–39 bpm: F3
o
40–49 bpm: F2
o
50+ bpm: F1
o
If no heartbeat is detected, the function will not start. Press the button again to
exit the recovery mode.
3.7 Full Reset:
Press the reset button to clear all exercise data and return to the default settings.
4. Operation Instructions:
4.1 Power On:
Plug in the device. After initialization, the screen will display U1.
Use the up/down buttons to select a user profile (U0–U4), then press MODE to confirm.
Enter your gender, age, height, and weight using the select button.
4.2 Choosing a Mode:
The function name will flash. Use up/down buttons to choose between PROGRAM, WATT,
USER, HRC, or PULSE modes.
Press select to confirm.
4.3 Adjusting Settings:
Use up/down and select buttons to set time, distance, and calories.
4.4 Quick Start Option:
If no setup is needed, select any profile (U0–U4) and start pedaling.
After all settings are confirmed, press the Start/Stop button to begin your workout.
Other information:
- This display offers the possibility to pair with a smartphone / tablet so that it can be
trained with an application. See:
- Always use the standard supplied adapter.
- If the appliance is not used for 4 minutes, the sleep mode will be activated.
- In the event of a defect, the plug must be pulled out and inserted again.
Manual – Exercise bike – FitBike – Ride 6 iPlus – FFHT014
www.betersport.nl/fitness-apps
17