EnOcean OVENTROP R-Tronic RT B Installations- Und Betriebs-Anleitung Seite 43

Function and commissioning
6.3 Subsequent modifi cation of the EEP profi le
If the EEP profi le shall be modifi ed subsequently or a wrong EEP profi le has
been activated, the factory settings of the thermostat have to be restored.
A different respectively the correct profi le can then be activated in the course
of the new installation (see paragraph 6.1 on page 12).
The factory settings of the "R-Tronic RT B" (ENOCEAN) are restored as follows:
1. Switch to the setup menu by
pressing the menu-button until
BACKLIGHT will appear on the
display.
2. Turn the menu-button all the way to
the right until FACTORY SETTINGS
will be displayed.
3. Press the menu-button. RESTORE
will be shown on the display.
2
"R-Tronic RT B" (ENOCEAN)
1
3
19/24
Opening of the
setup menu: Keep
pressed for
3 seconds