Function and commissioning
6.2 Adaptation to a gateway
After activation of the EEP profi le, there does not yet exist an automatic
communication between the wireless thermostat and the gateway. The
communication will only be established after having sent a telegram via the
"R-Tronic". Once the telegram has been received by the gateway, the wireless
thermostat will be "teached in".
The EEP profi le activated at the "R-Tronic" must be supported
by the gateway, i.e. it must be able to control the corresponding
function. If this is not the case, the "teach in" process will fail.
The "teach in" telegram is sent to the gateway as follows:
1. Switch to the setup menu by
pressing the menu-button until
BACKLIGHT will appear on the
display.
2. Turn the menu-button to the
right until INSTALLATION will be
displayed.
3. Press the menu-button. TEACH IN
will be shown on the display.
2
"R-Tronic RT B" (ENOCEAN)
1
3
17/24
Opening of the
setup menu: Keep
pressed for 3
seconds