EnOcean OVENTROP R-Tronic RT B Installations- Und Betriebs-Anleitung Seite 35

Installation
5.4 Use with mains adaptor and table stand (accessory)
CAUTION
Risk of fire due to overcharging of the batteries!
There is a risk of overcharging of the batteries if the "R-Tronic" is
equipped with batteries and is connected to the 230 V network via the
mains adaptor with table stand.
 The wireless thermostat must never be equipped with batteries
when using the mains adaptor with table stand.
1. Plug the mains adaptor which is connected to the table stand into an
earthed socket (100-240 V ~/50-60 Hz).
2. Insert the "R-Tronic" into the table stand from the top.
"R-Tronic RT B"
(ENOCEAN)
Remove
batteries!
Table stand
The "R-Tronic" is now ready for the "teach in" process (see paragraph
X
6.2).
NOTE
The "R-Tronic" is removed by pulling it vertically upward out of the table stands.
"R-Tronic RT B" (ENOCEAN)
11/24
Mains adaptor