EnOcean OVENTROP R-Tronic RT B Installations- Und Betriebs-Anleitung Seite 33

Installation
5.2 Wall attachment of fixing plate "R-Tronic RT B"
(ENOCEAN) (battery operation)
Power is supplied by batteries by default. A flush-mounted power pack and a
mains adaptor with table stand are available as accessories.
1. Insert two AA 1.5 V Mignon batteries into the battery case. The position of
the batteries is specified by the markings +/-.
2. Screw the supplied fixing plate for the wireless thermostat horizontally onto
the wall.
3. Insert the wireless thermostat into the fixing plate from the top.

Fixing plate
The "R-Tronic" is ready for the "teach in" process (see paragraph 6.2)
X


9/24
"R-Tronic RT B" (ENOCEAN)
NOTE
A necessary battery replacement
is indicated by a message on the
display.
"R-Tronic RT B"
(ENOCEAN)