End-Of-Life Disposal; Recommendations For Use - Elica Prf0181274 Anleitung Für Montage Und Gebrauch

- Grease filter
press and hold keys T6 and T5 to activate the function, the keys will light up and the light will flash very slowly,
indicating that the grease filter indicator can be activated.
Note: Press keys T2 and T1 to activate or deactivate.
- Odour filter
Press and hold keys T6 and T5 to activate the function, the keys will light up and the light will flash quickly, indicating that
the odour filter indicator can be activated (normally deactivated).
Note: Press keys T2 and T1 to activate or deactivate.

END-OF-LIFE DISPOSAL

This device is marked in compliance with the European Directive 2012/19/EC - UK SI 2013 No.3113, Waste
Electrical and Electronic Equipment (WEEE). Make sure that this product is disposed of correctly. The user helps
prevent potential negative consequences for the environment and for health.
The symbol on the product or accompanying documentation indicates that this product should not be treated as
household waste but should be handed over at a suitable collection point for the recycling of electrical and electronic
equipment. Dispose of it in accordance with local regulations for waste disposal. For further information about the
treatment, recovery and recycling of this product, please contact your local authority, the collection service for household
waste or the shop from where the product was purchased.

RECOMMENDATIONS FOR USE

Recommendations for correct use in order to reduce the impact on the environment: When cooking begins, the device
should be turned on at minimum speed, and left on for a few minutes even after cooking is complete. Increase the speed
only if there is a large quantity of fumes and steam, using the Booster function only in extreme cases. To keep the odour
reduction system running efficiently, replace the carbon filter/s when necessary. To ensure the high performance of the
grease filter, clean it when necessary. To improve efficiency and minimise noise, use the maximum duct diameter
indicated in this manual.
REGULATIONS
Equipment designed, tested and manufactured in compliance with safety regulations: EN/IEC 60335-1; EN/IEC 60335-2-
31, EN/IEC 62233. Performance: EN/IEC 61591; ISO 5167-1; ISO 5167-3; ISO 5168; EN/IEC 60704-1; EN/IEC
60704-2-13;EN/IEC 60704-3; ISO 3741; EN 50564; IEC 62301. EMC: EN 55014-1; CISPR 14-1; EN 55014-2; CISPR
14-2; EN/IEC 61000-3-2; EN/IEC 61000-3-3.
NOTES
: the parts marked with this symbol can be purchased separately from specialised dealers.
: the parts marked with this symbol are optional accessories supplied only with some models and can be purchased
from the websites www.elica.com and www.shop.elica.com.
9