Password - Tecsis EGS80X002001 Betriebsanleitung

Betriebsanleitung/Operating manual
EGS80X002001

6.1.2 Password

You can protect the current configuration from unauthorized changes by
using a password (see section 6.6; inactive when EGS80 delivered).
If password protection is active, the various settings in parameterisation
mode are visible before entry of the password, but may not be changed.
The first time an attempt is made to change a setting, the device
automatically displays a window for entering the password.
You must enter the password once each time after switching from
display mode to parameterisation mode.
The password cannot be changed and is 1234.
The password is entered as follows:
* If you press the
you hold the
values.
www.tecsis.de
or key, the value changes step by step. If
or key down, the value rolls to higher or lower
BD_BE 987 b 31