Connection - Tecsis EGS80X002001 Betriebsanleitung

Betriebsanleitung/Operating manual
EGS80X002001

4.2 Connection

The detachable clamps of the EGS80
considerably simplify the connection
and the switch cabinet assembly. They
make it possible to replace devices
quickly and without error if a customer
service becomes necessary.
Terminals are equipped with screws,
are self-opening, have a large
connection area for a wire cross-
section up to 2.5 mm² and coded
plugs, making it impossible to mix them up.
Terminals 1 through 3 of the EGS80 are used for the field current circuit
connection.
You can connect:
• a 3-wire transmitter
• a 2-wire transmitter
• an active source
The remaining terminals have the following functions:
• Terminals 7/8: power out (9 unused)
• Terminals 10 ... 12: relay 1
• Terminals 16 ... 18: relay 2
• Terminals 23/24: power supply (22 unused)
Terminals 4 ... 6, 13 ... 15 and 19 ... 21 are not present on the EGS80.
28 BD_BE 987 b
3
www.tecsis.de