Editing Device Data; Parameterisation Mode; Invocation - Tecsis EGS80X002001 Betriebsanleitung

Betriebsanleitung/Operating manual
EGS80X002001

6 Editing device data

6.1 Parameterisation mode

A change in device data will change the operation of the device!
Before entering new data into the device, you should therefore
ascertain that no danger to the installation will result.

6.1.1 Invocation

You can return to display mode from any point in the parameterisation
mode menu by pressing the ESC key (possibly more than once).
If 10 minutes elapse without a key being pressed in configuration
mode, the device switches automatically back to display mode.
30 BD_BE 987 b www.tecsis.de