Dismantling the front wheel
If due to a tire damage you have to dismantle
the front wheel, please proceed as follows:
Dismantling:
Open the connector on the right site of the fork.
Remove the rubbercap of the axle and loosen
the axelnuts of the wheel.
Now you can remove the wheel.
BV-F01 Pedelec
Assembly:
Insert the front wheel and place the torque
protection washers on the hub axle inside the
fork. Give a few turns to the axle nuts. Align the
front wheel and tighten the axle nuts.
Reconnect the plug-in connector.
Models with rear hub motor
Please apply the same
procedures as shown
above.
with Lithium-ion battery
43
GB