Assertion Of Liability For Defects Of Quality; Disclaimer For Defects Of Quality; Start-Up Of The Pedelec; Tial Operation Of The Drive Battery - Lindsey-west bicycle BV-F01 Benutzerhandbuch

Operating Instruction O perating Instruction
• damage which is attributable to normal wear
of parts such as tires, the chain, Bowden
controls and brake shoes.
• damage to the paint or chrome due to the
e ects of weather, moisture and ambient
conditions (particularly salty air) as well
as aggressive environments containing
ammonia.
• deficient maintenance of the Pedelec (in
deviation from the specifications described
in these operating instructions.
• repairs which were not performed by a
bicycle specialist.
• modifications of the drive system which
exceed the framework set forth by the
technical standard specification.
• structural modifications to the Pedelec which
deviate from its condition upon delivery.
This particularly applies to the drive battery.
Any modifications lead to the lapse of the
warranty!
• breakage of the electrical conductor which is
not attributable to design errors.
• defects caused by extraneous force.
• damage caused by the use of the Pedelec at
competitions.
• use of the drive battery in a manner
which is not compliant with the attendant
specifications.

Assertion of liability for defects of quality

• In the event of damage, please consult
your bicycle dealer. This is your competent
contact person at any time.

Disclaimer for defects of quality

Excluded from liability for defects of quality:
Personal injury or damage to any parts of your
Pedelec which are not original parts (insofar as
legally permissible).
The performance of repair work neither extends
nor renews the warranty on the product as a
whole.
30

Start-up of the Pedelec

The following chapters of the user manual of
the Pedelec presume that all basic ergonomic
settings and necessary safety checks of your
bike have already been done:
• Handle bar and seat have been brought
to the desired position and tightened
appropriately.
• The wheels have sufficient tire pressure and
their axle nuts have been tightened too.
• The function of the brakes and pedal drive
has been checked.
• The lighting system is functioning.
For more information refer to the Chapter
"Adjustments before ride".
Initial operation of the drive battery
Now remove the battery of the vehicle
on the luggage carrier. Check the
charge level. To do so the
display at the rear end of the battery under the
carrying handle. The figure shows the situation
at your pedelec.
Now check the charge status of
the Battery by pressing the button on
the LED power indicator.
recording
the battery
button on the LED