Explanations To The Vaping Modes; Vw Mode - Vt Mode - INNOCIGS EVIC VTWO MINI SET Bedienungsanleitung

INNOCIGS EVIC VTWO MINI SET – EXPLANATIONS TO THE VAPING MODES
VW mode (Variable Wattage)
When set in VW mode, the device can support a coil whose resistance is within the range of 0.1 ohm and 3.5 ohm. In VW mode the
output wattage (PWR) can be adjusted – depending on the used atomizer coil – from 1 W to 75 W by pressing the button "up" or
"down". Long pressing the button "up" or "down" rapidly increases or decreases the wattage level.
VT mode (Variable Temperature) | TEMP NI, TEMP TI, TEMP SS316
When set in TEMP NI, TEMP TI or TEMP SS316 mode, the device can separately support Nickel (Ni200), Titanium (Ti) and Stainless
Steel (SS316) coils. When set in one of the VT TEMP modes, the device supports a coil resistance within the range of 0.05 ohm and
1.5 ohm. In VT mode the vaping temperature can be adjusted – depending on the used atomizer coil – in a range between 200°F
and 600°F by by pressing the button "up" or "down". Long pressing the button "up" or "down" rapidly increases or decreases the
temperature level.
46