Operating & Changing The Modes - Innocigs Evic Vtwo Mini Set Bedienungsanleitung

INNOCIGS EVIC VTWO MINI SET – OPERATING & CHANGING THE MODES
Changing between the vaping modes
Press the fire button three times in quick succession to enter the menu. The display will indicate you are in the settings
menu by flashing. Press the "up" button to toggle between TEMP (VT), TCR, POWER (VW) and BYPASS modes. Press the fire
button or wait until the display flashes ten times to confirm the current settings and exit the menu.
1. To select the TEMP or TCR mode, press the "down" button while the display is flashing to enter the submenus VT, PWR,
COIL (resistance of the atomizer coil) and AMP (current amperage). Press the "up" button to navigate between modes
TEMP NI, TEMP TI, TEMP SS316 and TCR M1, M2 and M3. Press the fire button to confirm your selection. If the AMP line
flashes, press the "up" button to switch between AMP, PUFF and TIME.
2. After selecting the POWER or BYPASS mode, press the left "down" button while the display is flashing to enter the
submenus. To switch among AMP, PUFF (total amount of puffs) and TIME (total vaping time) use the right "up" button,
as soon as the AMP line is flashing.
48