Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Keep the machine and the controls clean and functional.
To clean the mixing tools, tilt the mixing station to the rear and rest it on
the handles (3). Take care that no water enters into the motor during
cleaning.
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
Use only the original mixing bucket from Eibenstock as replacement for
a worn mixing bucket. Correct function is guaranteed only with this
mixing bucket.
In case of failure, a repair has to be carried out by an authorised
service workshop.
Environmental Protection
Raw material recycling instead of waste disposal
To avoid damages on transportation, the power tool has to be delivered in
a sturdy packing. The packing as well as the tool and its accessories are
made of recyclable materials which makes it possible to remove
environmental friendly und differentiated because of available collection
facilities.
Noise Emission / Vibration
The indication of noise emission is measured according to DIN 45 635, part
21. The level of acoustic pressure on the work place could exceed 85 dB
(A); in this case protection measures must be taken.
Wear ear protectors!
Only for EU countries
Do not dispose of electric tools together with household
waste material!
In observance of the European Directive 2012/19/EU on
waste electrical and electronic equipment and its
implementation in accordance with national law, electric
tools that have reached the end of their life must be
collected separately and returned to an environmentally
compatible recycling facility.
20
Werbung
