Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Tool Change
Attention!
Before any work on the tool, disconnect the plug from the mains!
When inserting the tool, you could catch your hands. For this reason,
always wear protective gloves for changing the tool.
For tool change, you can tilt the TwinMix 1800 to the rear and can rest it
on the handles (3).
Universal stirrer (A):
For change of the stirrer (9), the two fixing bolts must be loosened from the
mixing paddle (10).
Use a spanner SW 22 to loosen the stirrer (9) and to lock the work spindle.
Mixing paddle (B):
The stirrer (9) always must be removed first for change of the mixing
paddle (10).
For change of the mixing paddle (10), use an Allen key SW6 to loosen the
two cheese-head screws
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel.
After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance. However, the following points always have to be
observed:
M8x20.
19
A
B
B
Werbung
