Ronix 8615 Bedienungsanleitung Seite 19

- Charge the battery cartridge with room temperature at 10°C - 40°C.
- Let a hot battery cartridge cool down before charging it.
CORDLESS DRILL / SCREW DRIVER SAFETY
WARNING!
- Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring or its own cord.
Fasteners contacting a «live» wire may make exposed metal parts of
the power tool live and could give the operator an electric shock.
- Always be sure you have a firm footing. Be sure no one is below when
using the tool in high locations.
- Hold the tool firmly.
- Keep hands away from rotating parts.
- Do not leave the tool running. Operate the tool only when hand-held.
- Do not touch the drill bit or the work piece immediately after operation;
they may be extremely hot and could burn your skin.
- Some material contains chemicals which may be toxic. Take caution to
prevent dust inhalation and skin contact. Follow material supplier safety
data.
WARNING!
Do not let comfort or familiarity with product (gained from repeated use)
replace strict adherence to safety rules for the subject product. Misuse
or failure to follow the safety rules stated in this instruction manual may
cause serious personal injury.
LIGHTING UP THE FRONT LAMP
CAUTION:
Do not look in the light or see the source of light directly.
Pull the switch trigger to light up the lamp. The lamp keeps on lighting
while the switch trigger is being pulled.
17
User Manual