OLMLMO 4-in-1 EMF METER Benutzerhandbuch Seite 6

8. TEMP (temperature measurement) function, when using this
function, it needs to be placed at the current ambient temperature
for more than 30 minutes to measure.
Degree of display
Buzzer
PEAK,MAX,mW/m2,mG
V/M electric field
Standard Frequency
Weighted Frequency
Reading the LCD
On-site measurements display digital measurements and units,
located at the bottom of the LCD display.
Accurate Reading
Field measurements are averaged to provide the most stable,
accurate reading possible. The display shows a circular bar
graph of the maximum range corresponding to the field
percentage measurement on a logarithmic scale. On-site
percentage indicator scales show 0, 10, 20, 50, 100 and 200
percent of full scale. The field percentage indicator is displayed
above the field measurement, at the top of the LCD.
Capture Peak
During the test, press the button "MAX" to start the MAX function.
The MAX symbol will be displayed on the upper left of the meter
value, and a peak value can be captured every 10 milliseconds
(ms).
Stable readings: Turn on the flow meter, and the readings
will be stable after the meter is placed and fixed
2
3
4
1
Battery indication
-5-
5
℃/℉ Temperature Unit
6
Value