OLMLMO 4-in-1 EMF METER Benutzerhandbuch Seite 3

Introduction
The Olmlmo EMF meter measures magnetic, electrical, and
radiofrequency radiation. It has the functions required for fast
and accurate testing of electromagnetic fields (EMF) temperature
(excluding testing nuclear radiation). In addition to the standard
AC measurement mode, a special frequency weighted mode will
properly scale the magnetic and electric measurements to indicate
the full magnitude of currents produced by each type of field inside
the human body. (The sensitivity of the test frequency is different
in different modes)
Features
- Detects all Four types of: AC Magnetic, AC Electric, and RF/
Microwave,temperature
- Special frequency weighting mode for measuring electric current
from EMF in the human body
- AC magnetic mode covers 40Hz-200kHz with a range of 0.1-
99.9mG milligauss (mG)
- AC Electric mode covers 40Hz -100kHz, range is 1-999V/M volts
per meter (V/m)
- TEMP mode, range is 0℃~70℃/32℉~158℉
- RF mode covers 20MHz -6GHz with a range of 19.999mW/m²
milliwatts per square meter (mW/m2)
- Large-size liquid crystal display (LCD), clear and accurate
readings, suitable for use in low-light environments
- Audio indicator sounds to help pinpoint the source of EMF
- Peak hold to capture fast pulses, PEAK is only used for RF
measurement test function
- It can work for more than 10 hours with a 3.7V battery, and the
low battery display shows the battery symbol
-2-