Venture Industries MPB-R Serie Betriebs- Und Montageanleitung Seite 19

Before launch
Type and model of fan are in accordance with the order.
The fan is undamaged.
There is no foreign body inside fan, and the fan is clean.
The fan is reliably and solidly fixed in workplace.
The fan is properly leveled
Wires are properly tightened.
Ambient temperature and transported medium temperature are compatible with fan nameplate
Proper electrical protection is applied
Grounding of fan is applied.
Network power supply is compatible with fan power supply.
Power supply disconnecting switch is applied.
Personnel using the fan read and understood the operation and montage manual.
Proper inlet and outlet covers (grids) have been applied
After fan launch (continuous work period minimum 30 minutes)
Readings and set of vibration measurement device has been written (they are available in future)
Readings and set of current measurement device has been written (they are available in future)
Value of current for each of phase does not exceed nominal one
The vibration value is not higher than permitted.
tel. (22) 751 95 50
Appendix B - (The device receipt form)
www.venture.pl
MPB-R/U/2016
fax. (22) 751 22 59
Check
confirmation
19/33