Stalgast SMARTCOOK Bedienungsanleitung Seite 39

4.11. Programmed automatic start
The automatic start function allows the user to program up to 9 weekly starts of the oven, giving the option to choose the recipes
with which the user wants to start the oven.
• Setting the automatic start:
1. Check that there is at least one memorised recipe.
2. Press the icon ,to go to the weekly programming.
3. Next, set a day, time and recipe for the oven automatic start. If you want to register an
additional program for another different start, press the icon
4. Press the icon ,to accept and save the data selected.
• Activating the automatic start:
1. Check that there is at least one programmed start.
2. Press the icon ,to switch the oven off. Next, press the icon
of the oven with programming function. Then, the programming data will be displayed on
the screen.
4.12. "Multicook" cooking
This system allows the user to cook different foods with different coking time, informing
about the end of the cooking process of each food when the trays are ready.
There are 2 different ways to go to the "multicook" cooking:
• Setting amulticook cooking cycle from amemorised recipe:
1. Check that there are no ongoing operations.
2. Set the "multicook" cooking cycle from a recipe. Next, press the icon
the cookbook.
3. Select an already programmed recipe from the cookbook. The screen shows the
number of selectable trays. At the bottom of the screen, the cooking parameters and
the present temperature of the unit is displayed.
4. Press the icon of the level wanted. Next, press the icon "TRAY" to include other
recipes.The unit will filter between the recipes compatible with the selected
parame- ters.
5. To select a new tray without entering the cookbook, press the level wanted only, for example
.Take into account that this tray will undergo the same cooking conditions (percentage
of humidity and temperature) as the first selected tray.
6. Next, press to modify the cooking time for this food.
7. Press icons or (or move the scroll bar) to select the time value wanted.
8. Press to confirm and start the cooking process.
9. After finishing the pre-heating operation, open the oven door and insert all the set trays. After
finishing the cooking cycle for each food, an acoustic signal is activated, and that tray will light
up green on the screen. At that time, open the oven door, remove the tray and close the oven
door again. Repeat this step until finishing all the programmed recipes.
10. To stop this operation at any time, press the icon
.
,to activate the starting
,to go to
-39 -
. .
2.
3.
4.
2.
2.
5.