Using The Alarms - Soundmaster Ur210 Handbuch

Setting alarms
The radio lets you have 2 alarm settings.
To set the alarm:
1. Press the button(10) to select between Alarm 1 and
Alarm 2 and then press the "SELECT" button (6) to
confirm the selection.
2. Press the or
alarm and then press the "SELECT" button (6).
Press the or
the alarm and then press the "SELECT" button (6).
3. Press the or
duration options and then press the "SELECT" button
(6) to confirm the selection
The duration defines the time before the radio returns to standby mode if the alarm is not
deactivated. Duration options: 15, 30, 45, 60, 90 and 120 minutes.
4. Press the or
"SELECT" button (6) to confirm the selection.
The source defines the sound source of the alarm.
Source options: DAB, FM and Buzzer.
If DAB or FM is selected, you will also be prompted to
select the last played station or one of the preset
stations (if set) as the alarm.
5. Press the or
options and then press the "SELECT" button (6) to
confirm the selection
The interval defines on which days the alarm is active.
Interval options: Daily, Once, Weekends and Weekdays.
If "Once" is selected, you will also be prompted to set a
specific date.
6. Press the or
and then press the "SELECT" button (6).
This setting defines the sound volume of the alarm.
7. Press the or
and then press the "SELECT" button (6) to confirm the
selection.
When the alarm setting is active, the corresponding alarm icon "A1" for alarm 1 and "A2" for
alarm 2 will show on the display.
At the set time, the alarm will sound. The volume will increase gradually until it reaches the set
volume level. The corresponding alarm icon will also flash on the display.

USING THE ALARMS

button (8/5) to set the hour time of the
button (8/5) to set the minute time of
button (8/5) to cycle through the
button (8/5) to cycle through the source options and then press the
button (8/5) to cycle through the interval
button (8/5) to adjust the volume level
button (8/5) to select alarm on or off
7
UR210 / English Instruction Manual