Getting Started - Soundmaster Ur210 Handbuch

1. Connect the cord of the power adapter to
the DC IN jack of the radio.
2. Connect the plug of the power adapter to
a wall socket.
The radio is powered and in standby mode
when you see the display is switched on.
Power on or off
/"SOURCE" button (4) in standby mode to turn the radio on.
1. Press the
2. Press and hold the
standby mode. The time and date show on the display in standby mode.
To completely disconnect the radio from power, remove the plug of the power adapter from the
wall socket.
Setting the clock
The date and time of the radio is automatically set once it receives radio broadcast signals (and
when such info is available). You may also set the date and time through the setting menu. To
do so:
/"SOURCE" button (4) to turn the radio on.
1. Press the
2. Press and hold the "MENU" (3) button.
3. Press the or
the display and then press the "SELECT" button.
4. Press the or
display and then press the "SELECT" button.
5. Press the or
"SELECT" (6) button.
6. Press the or
confirm.
7. Repeat step 6 to continue setting minute time, date, month and year.
For more date and time settings, see chapter "Time".
Using the antenna
Unroll and extend the antenna to improve DAB/ FM signal reception.
Controlling the volume
 Press the
or

GETTING STARTED

/"SOURCE" button (4) when the radio is turned on to switch it to
button (8/5) until you see "System" on
button (8/5) until you see "Time" on the
button (8/5) until you see "Set Time/Date" on the display and then press the
button (8/5) to set hour time and then press the "SELECT" button (6) to
button (1/7) to adjust the volume.
2
UR210 / English Instruction Manual