Using The Alarms; Setting Alarms; Deactivating A Sounding Alarm - Soundmaster Ur124Sw Bedienungsanleitung

SETTING ALARMS

The radio lets you have 2 alarm settings. To set the alarms:
1. In standby mode, press and hold the "AL1 / AL OFF
enter the alarm time setting mode.
2. In the alarm setting mode, press the "AL1 / AL OFF
repeatedly to cycle through the setting options:
Alarm time > Alarm sound source
• Setting alarm time:
Press the ">" to set the hour time and "<" button to set the minute time.
Press and hold the buttons to change quickly.
• Setting alarm sound source:
Press the ">" or "<" button to select buzzer (bu) or radio (last used frequency) as alarm
sound source. The corresponding alarm indicator will turn on according to your selection.
Note: When the alarm is set to radio mode, the alarm will use the last tuned radio station.
TURNING THE ALARMS ON OR OFF
In standby mode, press the
disable the respective alarm. The corresponding Alarm 1 or Alarm 2 indicator will switch on
when the alarm is enabled.

DEACTIVATING A SOUNDING ALARM

• Press any "AL OFF" button to switch off a sounding alarm.
• When the alarm sounds, the corresponding Alarm 1 or Alarm 2 indicator flashes on the
display.
SNOOZE
• To temporarily silence a sounding alarm, press the "SNOOZE / SLEEP" button. The alarm
will sound again when the snooze period (9 minutes) is over.
• The corresponding Alarm 1 or Alarm 2 indicator flashes on the display during the snooze
period.
• To cancel the snooze period and the alarm, press any "AL OFF" button.
• This sleep function defines the duration of time before the radio switches itself off
automatically.
• When the radio is switched on, press the "SNOOZE / SLEEP" button repeatedly to select a
sleep period (Options: OFF, 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes).
• The radio will automatically switch off when the sleep period is over.
• Press "SNOOZE / SLEEP" to check the remaining time before the radio switches off.
• Press "ON/OFF

USING THE ALARMS

AL1 / AL OFF
"
" to cancel this function.
" or "AL2 / AL OFF
" or "AL2 / AL OFF
or "AL2 / AL OFF
"
SLEEP
3
UR124 / English Instruction Manual
" button to
" button
button to enable or
"