Listening To Dab Broadcasts - Soundmaster Ur210 Handbuch

Selecting DAB mode
/"SOURCE" button (4) to turn the radio on.
1. Press the
/"SOURCE" button (4) to select DAB mode.
2. Press the
Scanning for DAB stations
The first time you use the radio, or if the station list is empty,
the radio automatically performs a station search. You may
also perform a station search manually. To do so:
 In DAB mode, press the "SCAN" button (2) to activate
the automatic station search.
The radio automatically stores radio stations with sufficient signal strength.
After the search is complete, the first stored station is broadcast automatically.
Tuning to a DAB station
1. In DAB mode, the
the DAB stations in the station list.
2. Press the "SELECT" button (8/5) to tune to the selected
DAB station.
Storing preset stations
You can store up to 10 DAB stations as preset stations.
1. Tune to a DAB station.
2. Press and hold the "PRESET" button (9) until "Preset
Store" shows on the display.
3. Press the or
4. Press the "SELECT" button (6) to confirm.
The DAB station is stored with the selected preset number.
Repeat steps 1-4 to store more preset stations.
5. To tune to a preset station, press the "PRESET" button (9) once, then press the
button (8/5) to cycle through the list of preset stations and then press the "SELECT" button
(6) to confirm the selection.
To change the DAB station assigned to a preset number, repeat steps 1 to 4 above to overwrite
the existing DAB station.
Displaying DAB information
Press the "INFO" button (3) repeatedly to cycle through the following information (if available).
 Dynamic label segment (DLS)
 Signal strength
 Program type (PTY)
 Ensemble name
 Frequency

LISTENING TO DAB BROADCASTS

or button (8/5) to cycle through
button (8/5) to select a preset number.
UR210 / English Instruction Manual
 Signal error rate
 Bitrate codec
 Time
 Date
3
or