Technical Information - Meister MPH1500-1 Originalbetriebsanleitung

5452860-Bohrhammer_man 06.01.15 11:05 Seite 43
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.
The permitted revolutions of the tool
insert must be at least as high as the
highest value specified on the electrical
tool. Accessories that turn faster than is
permitted may break and fly away.
The external diameter and thickness
of the tool insert must match the
dimensions of your electrical tool.
Incorrectly measured tool inserts cannot
be properly protected or checked.
There is a risk of injury. The user of the
device is liable for all property and
personal damages occurring as the
result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks:
The operating instructions for this
electrical tool contain comprehensive
tips for the safe handling of electrical
tools. However, every electrical tool has
a certain level of remaining risks which
cannot be excluded by the protective
mechanisms on the device. Always
operate electrical tools with the
necessary care.
Remaining risks may be, for example:
• Touching rotating parts or tools.
• Injury caused by flying tools or tool
parts.
• Risk of fire with insufficient ventilation
of the motor.
• Adverse effects on the hearing caused
by working without ear defenders.
The ability to work safely is dependant on
the familiarity of the operator when it
comes to handling the given electrical tool.
Appropriate knowledge of the machinery
and careful behaviour when working help
to minimise the remaining risks.
5 – Technical information
Technical data
Power supply
Nominal consumption 1500 W
Speed
Number of blows
(without load)
Maximum drill diameter
- in wood
- in cement/stone/
granite
- in steel
Weight
Cable
We reserve the right to make technical
changes.
is a registered trademark of
Meister Werkzeuge GmbH
Wuppertal/Germany
Noise emissions/Vibrations
L : 95 dB(A), L : 106 dB(A).
pA WA
Measuring inaccuracy:
K : 4 dB(A), K : 4 dB(A).
pA WA
Hand/arm vibrations
2
a : 17,6 m/s .
h,HD
Measuring inaccuracy K: 4.9 m/s
230 V-/50 Hz
-1
n = 0-850 min
0
-1
0-3900 min /4.0J
40 mm
32 mm
13 mm
5.6 kg
300 cm
2
43