Components; Correct Use - Meister MPH1500-1 Originalbetriebsanleitung

5452860-Bohrhammer_man 06.01.15 11:05 Seite 42
switch position for the work you wish
to carry out. Otherwise you may be at
risk of injury when the tool starts up.
• Avoid allowing the motor to come to a
standstill under load when drilling or
screwing screws.
Safety marks on the type plate
The symbols on the housing have the
following meanings:
Do not dispose of with the
household waste!
Important! Observe the
operating instructions!
Wear goggles.
Wear ear defenders.
Wear a dust protection
mask.
Housing is double insulated.
CE mark (conformity with
European safety standards)
Voluntary "geprüfte Sicher -
heit" seal of quality (tested
safety)
3 – Components
1 Selection knob for hammer
drilling/chasing
2 Gear oil filler opening
3 Vibration damper
4 Speed preselection
5 On/Off switch
42
6 On/Off switch for hammer action
7 Handle
8 Additional handle
9 Clamp opening
10 Depth stop
11 Tool receiving socket
12 Holding bush
13 Wing screw
14 Dust collector
15 LED operating display
4 – Correct use
This rotary hammer drill is suitable for
drilling and hammer-drilling concrete,
stone, masonry and light chiselling work
around the house. Use only suitable
accessories (note manufacturer's
instructions). All other applications are
expressly excluded. Chuck designed for
SDS+ system tools
The machine is intended only for use in
the household.
This unit may not be used by people
(including children) with reduced physical,
sensory or mental capacities, with a lack
of experience and without the appropriate
knowledge, unless they are supervised by
someone who is responsible for their
safety or have been instructed by such a
person with regard to how the unit is to
be operated. Children should be
supervised to ensure that they do not
play with the device.
Improper use of the product
All applications carried out with the
device that are not listed in the "Proper
use" chapter will be considered
improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.