GEV FlammEx Montage Seite 7

3. Mounting the relay
3a
brown = +
blue =
3b
Exemples for using the relay:
Siren, signal lamp, alarm system.
Recessed socket
Switch relay
(optional)
prod. no. 003194
AC 240 V / 5 A
DC 24 V / 10 A
NO NC
COM
-
4.
Functions
NO
OK: Green LED
(flashing)
The equipment is ready for
CO
operation approximately 10 mins.
after connecting it to the electrical
power supply. Permanent light:
the equipment is ready for
operation: „Power ON".
: Orange LED
Illuminates in the event of
an interruption.
ALARM: Red LED
It flashes and a supple-
mentary acoustic signal
generator (transducer)
sounds intermittenly in
the event of an alarm
= see conduct in the
event of an alarm.
TEST: Test knob and muting switch
Test knob Operate once a month to
test the function. The red and orange
LEDs will flash and an acoustic signal
tone will sound intermittently.
Muting switch: You can switch off
the acoustic alarm tone in the event
of an alarm.
The red LED will continue to flash
and a short signal tone will sound
approximately every 45 secs.
Electrical power
connection:
230V ~ 50 Hz in the socket
outlet. No function when
the electrical power supply
is interrupted.
Or, 12 V direct current
(DC) From a battery or rectifier
for example. No function
when the electrical power
supply is interrupted, or when
there is undervoltage.