IME Nemo D4-Le Bedienunganleitung Seite 33

Nemo D4-Le
Rogowski
1.2 Connection
↵
selects the connection
Confirms
Select the desired connection and scrupulously respect the linked wiring diagram.
The selectable wiring diagrams are:
Symbol Line
1N1E Sigle-phase
3-1E 3-phase 3 wires
3N1E 3-phase 4 wires
3-2E 3-phase 3 wires
3-3E 3-phase 3 wires
3N3E 3-phase 4 wires
1.3 Current delay time and average power
Selectable delay time: 5, 8, 10, 15, 20, 30, 60 minutes
The selected time is valid both for the current and the average power
↵
selects the time value
confirms
8
Load Coils Wiring
- 1 S 1000/440
Balanced 1 S 1000/441
Balanced 1 S 1000/442
Unbalanced 2 S 1000/443
Unbalanced 3 S 1000/444
Unbalanced 3 S 1000/445
1.4 Display lighting
The 4 selectable levels
↵
selects the lighting level
confirms
1.5 Run hour meter count start
Select the quantity which starts the run hour meter count:
1.5a Voltage count start
Connection
Voltage: count start with phase voltage > 20V
↵
Aron L1 - L3 selects voltage or current
confirms
1.5b Power count start
↵
selects voltage or power
confirms
Power: total active power, programmable value 0,5...50%Pn
moves the cursor
↵
increases/decreases the loaded value
confirms
(0 – 35 – 70 – 100%) %) show the display lighting percentage
Voltage or Power.
(rated power)
07/16 10783322 WEB E cod.MFD4421SR