Herunterladen Inhalt Inhalt Diese Seite drucken

Clear Display - CashConcepts CCE 112 MULTI Benutzerhandbuch

Elektronischer falschgeldprüfer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CashConcepts
CCE 112 MULTI
Report Function
If you set CCE 112 MULTI on total value announcement (ADD & Value are indicated in the display), you can open
the report function at the end of the check. Then you receive the detailed information, how many banknotes of
which currency and with which valency you have tested, as well as the respective total of all currencies. Press for
the report function and for the navigation in the report menu several times the REPORT key.
In the left corner under "Currency" you see the topical currency in the report menu. On top on the right you see
the topical valency ("Denomination") of the banknote and under it the number of the notes ("Pieces") which were
checked by this valency. If the display of "Denomination" changes to "Value" changes you receive the total of the
topical currency, as well as the number of all bank notes which were accepted.
By renewed pressure on REPORT you see the report of the next checked currency.
If a banknote is inserted during the report menu, the menu will automatically be closed and you see the normal test
display again.

Clear Display

If you liked to clear the announcement of the device, press once the button ON-OFF / CLR. Then the counting
result or the single value checked last is cleared and the unit shows zero in both displays.
If the total value of 999.999 or the total number of banknotes of 999 will be reached the display will be cleared to
zero.
Energy Savings Mode
The CCE 112 MULTI switch after 5 minutes without use to the energy savings mode and switches off the display
and the announcement of the issue direction. The white LED shines further. If the device is in the energy savings
mode you can check furthermore banknotes, because by the insertion of a note the device switches itself
immediately again in the active mode.
After 20 minutes the device switches off itself completely and then must be switched on again. To turning on hold
the ON/OFF button for approx. 2 seconds pressed.
12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis