Inhaltszusammenfassung für Gastroback COLOUR VISION
Seite 1
GASTROBACK ® Bedienungsanleitung WASSERKOCHER COLOUR VISION Art.-Nr. 42420 Wasserkocher Colour Vision Bedienungsanleitung vor Gebrauch unbedingt lesen! Modell- und Zubehöränderungen vorbehalten! Nur für den Hausgebrauch!
Sie das Gerät in Betrieb nehmen und beachten Sie bitte alle Warnhinwei- se, die in der Bedienungsanleitung aufgeführt sind. Inhaltsverzeichnis Ihren Wasserkocher Colour Vision kennen lernen ............3 Allgemeine Eigenschaften ..................4 Dreifache Sicherheit ....................4 Sicherheitshinweise ....................4 Allgemeine Hinweise zur Sicherheit ................4...
Der Wasserkocher Colour Vision von Gastroback dient zum schnellen und problemlosen Erhitzen und Warmhalten von sauberem Trinkwasser und verschiedenen Getränken. Die leistungsstarken 2400-W-Heizelemente sind in den Boden des Kessels integriert und dadurch geschützt vor Beschädigungen. Die Kesselwände bestehen zum Teil aus Edelstahl und lassen sich bei Bedarf leicht und problemlos reinigen und entkalken.
Allgemeine Eigenschaften • Elektronische Steuerung für die Koch- und Warmhaltefunktion • 2,4-kW-Schnellkochfunktion • Mehrfarbige Beleuchtung; zeigt die aktuelle Temperatur an; von blau (kalt) nach rot (heiß) • Wählbare Temperatur für die Warmhaltefunktion; ideal für Kaffee, Tee, usw. • Schnelle Abschaltung und kurze Rückstellzeit, wenn die Siedetemperatur erreicht ist und/oder der Überhitzungsschutz angesprochen hat.
Seite 5
führen sowie Sachschäden und Personenschäden durch hohe Temperaturen, Feuer und elektrischen Schlag verursachen. • Überprüfen Sie regelmäßig die Dichtheit des Kessels. Geringe Mengen Feuchtigkeit auf dem Netzteil kann durch Kondenswasser entstehen und deutet nicht auf einen Schaden am Gerät hin. Prüfen Sie auch das Netzteil und das Kabel regelmäßig auf Beschädigungen. Die Kontakte am Stecker müssen blank und glatt sein und dürfen keine Verfärbungen haben.
ausgesetzt war (Beispiel: Sturz, Schlag, Überhitzung, eingedrungenes Wasser). • Ziehen Sie sofort den Netzstecker aus der Steckdose, wenn während des Betriebes ein ernstes Problem auftritt (Beispiel: Wasser läuft über, Überhitzung). Schließen Sie das Gerät erst an die Stromversorgung an, nachdem Sie es nach den Anleitungen in diesem Heft richtig gefüllt haben;...
Wichtige Sicherheitshinweise – Elektrizität • Stellen Sie das Gerät in der Nähe einer passenden Wandsteckdose auf und schlie- ßen Sie das Gerät dort direkt an. Wickeln Sie das Kabel dazu immer vollständig ab. Verwenden Sie keine Verlängerungskabel oder Mehrfachsteckdosen. Das Gerät darf nur an die einzeln abgesicherte Schuko-Wandsteckdose einer geeig- neten Stromversorgung (Wechselstrom;...
Verwendung Packen Sie das Gerät vorsichtig aus und entfernen Sie das Verpackungsmaterial voll- ständig; entfernen Sie aber nicht die Typenschilder. Füllen Sie den Kessel vor der ersten Verwendung bis zur obersten Füllstandsmarke (1.5 l) mit Wasser, bringen Sie das Wasser nach folgender Anleitung zum Kochen und gießen Sie das Wasser dann weg.
Seite 9
und die EIN/AUS-Taste leuchten auf und das Heizelement beginnt zu arbeiten. WARNUNG: Die Außenwände des Kessels werden beim Betrieb sehr heiß. Außerdem kann heißer Dampf aus der Tülle und am Deckel austreten. Besonders wenn Sie den Deckel öffnen, können große Mengen Dampf austreten. Halten Sie während des Betriebes niemals Ihre Hände oder Ihr Gesicht über den Kessel und legen Sie keine Gegenstände (Tücher oder ähnliches) über den Kessel.
Warmhaltefunktion Der Kessel kann das Wasser auf eine vorgewählte Temperatur erwärmen und bis zu 2 Stunden bei dieser Temperatur halten (Warmhaltefunktion). 1. Sie sollten das Wasser zunächst nach obiger Anleitung zum Kochen bringen. 2. Wählen Sie dann die gewünschte Temperatur durch Drücken der Warmhalte- und Temperaturwahltaste (Abb.
(kalt) bis rot (kochend). Dadurch können Sie erkennen, welche Temperatur das Wasser im Kessel bereits hat. Im Display erscheint die Anzeige LO. Sobald das Wasser eine Temperatur von über 40 Grad erreicht hat, sehen Sie im Display die aktuelle Wassertemperaturanzeige. Hinweis: Die Temperaturanzeige kann zwischen +/- 5-8°...
Den Innenraum des Kessels müssen Sie normalerweise nicht reinigen, wenn Sie im Kessel nur Trinkwasser erwärmt haben. Spülen Sie den Kessel nur kurz mit klarem Trinkwasser aus, wenn das Gerät neu ist oder längere Zeit nicht benutzt wurde. 1. Andernfalls stellen Sie den Kessel auf eine feste Unterlage und gießen etwas heiße Spülmittellösung hinein.
Kessel vorher entkalken (siehe: Kesselstein entfernen). Wickeln Sie bei Bedarf das Netzkabel um die Kabelaufwicklung unter dem Boden des Netzteils. Technische Daten Modell: Art.-Nr. 42420 Wasserkocher Colour Vision Stromversorgung: 220 – 240 V Wechselstrom, 50 - 60 Hz Leistungsaufnahme: 2.000 –...
Tel.: 04165/2225-0 oder per E-Mail: info@gastroback.de Gewährleistung/Garantie Wir gewährleisten für alle Gastroback-Elektrogeräte, dass sie zum Zeitpunkt des Kaufes man- gelfrei sind. Nachweisliche Fabrikations- oder Materialfehler werden unter Ausschluss weit- gehender Ansprüche und innerhalb der gesetzlichen Frist kostenlos ersetzt oder behoben.
Seite 15
GASTROBACK ® Operating Instructions KETTLE COLOUR VISION Art.-No. 42420 Kettle Colour Vision Read all provided instructions before first use! Model and attachments are subject to change! For household use only!
Seite 16
Carefully read all provided instructions before you start running the appliance and pay attention to the warnings mentioned in these instructions. Table of contents Knowing your Kettle Colour Vision ................17 Basic features .....................18 Triple protection ....................18 Important safeguards ....................18 General safety instructions ...................18 High temperatures –...
The Kettle Colour Vision is designed to heat clean drinking water and other beverage quickly and easily and keep it warm for up to 2 hours. The powerful 2,400 W concealed heating element is integrated in the bottom of the kettle to keep it safe from damage. Because of the stainless steal design, the interior of the kettle can be cleaned and decalcified effortlessly.
Basic features • Electronic Control for boiling mode and KEEP WARM mode • 2,400 Watt rapid boil function • Coloured illumination indicating the current temperature from blue to red • Multiple KEEP WARM temperature selection; ideal for coffee, tea, etc. •...
Seite 19
Do not attempt to operate the appliance and immediately switch off and unplug the appliance if water leaks out of the kettle and after any other malfunction of the appliance. • Any use of accessories, attachments or spare parts not recommended by the manufacturer may result in fire, electric shock and injuries to persons.
• Only use the appliance for heating runny liquids (i.e. water, coffee or tea). Do not use the appliance for cooking other foodstuffs or liquids, that could burn and/or boil over, to avoid overheating and damage to the appliance. • Never use abrasive cleaners, cleaning pads or any hard and sharp objects (i.e. metal scouring pads) for cleaning.
To protect against fire, do not operate in the presence of explosive and/or flammable fumes or gases. Using your Kettle Colour Vision Carefully unpack the appliance and remove any promotional material attached to the kettle, but do not remove the warning or model labels on the appliance. Before first use, fill the kettle to its maximum level (1.5 l) with pure drinking water, boil according the following instructions...
Seite 22
Always place the appliance on a stable, level, dry, heat-resistant and easy accessible surface. Do not place the appliance on an inclined surface. Ensure, that the power base will not tilt or wobble before placing the kettle on it. Otherwise, during operation boiling water could splash from the kettle and cause scalding and damage.
Colour bright blue dark blue pink dark red Temperature up to 50 °C 60 °C 70 °C 85 °C and higher 100 °C Range of use hot water instant green tea, black tea and lemon coffee white tea fruit tea 7.
Seite 24
Colour green bright blue dark blue pink Temperature 40 °C 50 °C 60 °C 70 °C 85 °C Your kettle will cool down to the selected temperature and hold the temperature until the kettle is turned off (for 2 hours at a maximum). You may also want to bring cold liquid to a desired temperature by avoiding an initial boil (e.g.
WARM button and select the desired temperature again after returning the kettle to the base. Important: We recommend turning the kettle off by pressing the KEEP WARM button before removing the kettle from the power base. Care and cleaning WARNING! Always switch OFF, unplug and let the appliance cool down before removing the mesh filter, moving the power base or cleaning the appliance.
2. Clean the mesh filter. Rinse the filter under running water. Possibly use a nylon cleaning brush or sponge. If the mesh is blocked with lime: leave the filter overnight in warm vinegar. Carefully rinse with clear tap water. 3. To replace the filter, open the kettle lid and simply slide the filter in the correct orientation down into the slots behind the spout of the kettle.
Information and service Please check www.gastroback.de for further information. For technical support, please contact Gastroback Customer Care Center by phone: +49 (0)4165/22 25-0 or e-mail: info@gastroback.de. Warranty We guarantee that all our products are free of defects at the time of purchase.