COLAMY 5188 Produkthandbuch Seite 4

ENGLISH
ASSEMBLY INSTRUCTIONS
Tips: Please do not 100% tighten all the bolts until the chair is fully assembled, just 50% is OK, make it has
space to adjust the chair.
STEP 1
Turn the Star Base(7) upside down, press the Casters(5) into the holes at the end of each
base leg. Then insert the Gas Piston(6) into the Star Base.
03
5
7
6
ASSEMBLY INSTRUCTIONS
STEP 2
Attach the Arms(4) to the Seat Cushion(2) with Six Bolts M6*35mm(9), using Wrench (12).
Note 1: Armrests are marked with Letter "L" (left) or "R" (right) to show which sides they should
be placed on.
Note 2: Please do not use Wrench (11) here, otherwise the handle of the seat plate will be
scratched by Wrench (11).
4
ENGLISH
2
9
12
4
04