ENGLISH ENGLISH WARNING ASSEMBLY PARTS AND TOOL MISSING PARTS? PLEASE MAKE SURE ALL THE PARTS ARE INCLUDED. Please read the instructions carefully and follow the assembly steps. support@colamyhome.com To ensure proper assembly, please follow all steps and use all parts provided. Not following this warning may result in serious injury to you or others.
ENGLISH ENGLISH ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 2 Attach Two Iron Plate (5) to the legs, align the screw holes on legs, and using Two 19mm Note: Please do not 100% tighten all the screws until the chair is fully assembled, just 50% is OK, make it Bolts (2), then tighten by Allen Wrench (7).
Seite 5
ENGLISH ENGLISH ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 3 STEP 4 Place the finished leg frame upside down on the ground. Then put X-Metal Plate (6) on the Attach Backrest A to the finished base, using Two 19mm Bolts (2), tighten by Allen Wrench bottom of the legs cross connection, tighten Four 19mm Bolts (2) to 70% by Allen Wrench (7).
Seite 6
ENGLISH ENGLISH ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Attach Seat Cushion B to the finished chair frame, using Four 63mm Bolts (1), Spring Washer Adjust the foot nails to level the chair. Now, your chair is successfully installed. (3) and Flat Washer (4), tighten all bolts on the bottom of the legs cross connection to 100% by Allen Wrench (7).
If the product is faulty when received, please contact us, and we will assist you with the return, COLAMY promises to repair or replace any COLAMY chair that is found to be defective in material or covering the shipping costs in this case.
GERMAN / DEUTSCH GERMAN / DEUTSCH WARNUNG MONTAGETEILE UND WERKZEUG FEHLENDE TEILE? Bitte lesen Sie die Anweisungen sorgfältig durch und befolgen Sie die BITTE STELLEN SIE SICHER, DASS ALLE TEILE ENTHALTEN SIND. support@colamyhome.com Montageanleitungen. Um eine ordnungsgemäße Montage sicherzustellen, befolgen Sie bitte alle Schritte und verwenden Sie alle bereitgestellten Teile.
GERMAN / DEUTSCH GERMAN / DEUTSCH MONTAGEANLEITUNGEN MONTAGEANLEITUNGEN SCHRITT 2 Befestigen Sie zwei Eisenplatten (5) an den Beinen, richten Sie die Schraubenlöcher Hinweis: Bitte ziehen Sie alle Schrauben erst zu 100% fest, nachdem der Stuhl vollständig montiert ist. 50% an den Beinen aus und verwenden Sie zwei 19mm Schrauben (2). Ziehen Sie diese Festziehen ist ausreichend, damit noch Spielraum zur Justierung des Stuhls bleibt.
Seite 10
GERMAN / DEUTSCH GERMAN / DEUTSCH MONTAGEANLEITUNGEN MONTAGEANLEITUNGEN SCHRITT 3 SCHRITT 4 Stellen Sie das fertig montierte Beingestell umgedreht auf den Boden. Legen Sie dann Befestigen Sie die Rückenlehne A am fertig montierten Untergestell, verwenden Sie die X-Metallplatte (6) auf die untere Kreuzverbindung der Beine und ziehen Sie vier zwei 19mm Schrauben (2) und ziehen Sie diese mit dem Inbusschlüssel (7) fest.
Seite 11
GERMAN / DEUTSCH GERMAN / DEUTSCH MONTAGEANLEITUNGEN MONTAGEANLEITUNGEN SCHRITT 5 SCHRITT 6 Befestigen Sie das Sitzkissen B am fertig montierten Stuhlgestell. Verwenden Sie Stellen Sie die Stellfüße ein, um den Stuhl auszurichten. vier 63 mm Schrauben (1), Federscheiben (3) und Unterlegscheiben (4). Ziehen Sie Jetzt ist Ihr Stuhl erfolgreich montiert.
Wenn das Produkt bei Erhalt defekt ist, kontaktieren Sie uns bitte, und wir werden Ihnen bei der COLAMY verspricht, jeden COLAMY-Stuhl, der innerhalb eines Jahres ab dem ursprünglichen Kaufdatum aufgrund von Material- oder Verarbeitungsfehlern als defekt befunden wird, zu reparieren oder zu Rücksendung helfen und die Versandkosten in diesem Fall übernehmen.
Seite 13
ASSEMBLY VIDEO colamyhome.com support@colamyhome.com +1(888) 886-1743...