Product Package - Rivacase Va2041 Bedienungsanleitung

Thank you for purchasing the RIVACASE portable battery.
Read all instructions and warnings carefully before
using the RIVACASE portable battery.

Product package:

• RIVACASE portable battery
• User manual
• Micro USB cable
Specifications:
Model: VA2041
Battery: Li- Polymer 3.7 V
10000 mAh 37 Wh
Input: Micro USB 5 V 2 A
Type-C 5 V 2 A
Output: USB1 5 V 1 A
USB2 5 V 2,1 A
Type-C 5 V 2,1 A
Safety protection
Over charge | Over discharge | Short circuit protection | Over current | Over Voltage
Operating instructions
Charge the external battery fully before the first use. Connect the cable to the Micro USB/Type-C
input port of the external battery. Connect the other end of the cable to the power source. You can
use PC, AC charger or car charger to charge the battery. We recommend to use RIVACASE PS4192
or similar charger. Average full charging time is 5-6 hours.
The LED indicator shows the charge level during the charging of the RIVACASE battery. After
RIVACASE battery is fully charged, 4 LED indicator lights are constantly on. Disconnect the cable
from the battery when charging is complete.
To charge the mobile device, connect it to the output port (Port 1, 2 and/or 3) of the RIVACASE
battery using the cable. Charging will start automatically, and the indicator will show the
remaining charge of RIVACASE battery. Disconnect the cable from the battery when charging
is complete.
Type-C input / output
You can use Type-C socket to charge devices and recharge RIVACASE VA2041 itself.
We do not recommend keeping RIVACASE battery discharged, as it might be damaged. Press the
button to check the battery charge.
5
1
2
4
EN
3
LED status Power Level