Royal Catering RCCCM-01TE Benutzerhandbuch Seite 12

• The two warming plates could be very hot during and after operation, please do not touch
them and only hold the glass decanter with its thermal insulated handle to avoid harmful to
your hands.
4. Operation
1) Before use, carefully check if the appliance is without damage. Contact your supplier if you
find damage or problem, and don't use the appliance.
2) Remove all packaging and protective material.
3) Place the appliance on a stable and level platform.
4) Leave sufficient space around the appliance for ventilation.
5) Place the paper filter in the funnel of the appliance.
6) Open the water entrance flip cover of the water reservoir.
7) Fulfil the thermos with cold water and pour into the empty water reservoir.
8) Close the cover and leave the appliance for 1 minute to let the air come out.
9) Place the thermos on the underneath the funnel after water filled.
10) Connect the power plug to power socket.
11) Add 80-95 grams of coffee powder into the paper filter and slide the funnel into position.
12) Switch the power ON, the control light indicator will turn on.
13) Switch on the brewing button, the control light indicator will turn on.
14) After a while, hot water starts dripping into the thermos.
15) When the "Brewing Indicator" light turns off, the brewing cycle is complete.
Power
ON/OFF switch button:
- Pause the brewing Process
- Main Power Switch
Grounding of the appliance
This is a Class I electrical appliance which must be connected to a safety ground. This appliance has a
power cord and electrical plug with ground wire and pin. The electrical plug must be plugged into an
main socket installed with earth connection.
EN
Start / Pause:
Brew switch button:
- Heating Switch for Brewing
- Pause the brewing Process