INNOCIGS TAROT NANO Bedienungsanleitung Seite 37

INNOCIGS TAROT NANO – USING THE DEVICE
2. Setting the temperature: The temperature can be set in the TC-Ni / TC-Ti /
TC-SS / TCR by pressing the plus and minus keys. You can choose between
the ranges 100 to 315 °C and 280 to 600 °F. While pressing the plus or minus
button, the temperature will be increased or decreased by 5 °C or 10 °C.
Press and hold the respective button to set the desired temperature at higher
speed.
3. Locking / unlocking the coil resistance: In the TC-Ni, TC-Ti, TC-SS and TCR
modes, lock or unlock the resistance by holding down the minus and mode
buttons simultaneously for 2 seconds.
The OLED display shows a lock (
selected resistance will not be marked-down.
). By replacing the atomizer head the last
35