Selecting The Operating Mode - INNOCIGS TAROT NANO Bedienungsanleitung

INNOCIGS TAROT NANO – USING THE DEVICE

Selecting the Operating Mode

Press and hold the mode button for 3 seconds to toggle between Smart VW, VT
(Ni 200, VS, TI), TCR, BYPASS, CCW or CCT mode.
Setting the Smart VW Mode
As an advanced product, the device is able to automatically adjust the appropriate
resistance value using the Smart VW mode. By pressing the plus or minus button,
you can set the number of watts. In VW mode, the Tarot Nano is compatible with
coils with a resistance of 0.15 to 5 Ohm.
Setting the CCW Mode
In the VW mode, press the mode button 3 times to enter the CCW Mode. Press the
mode and the plus or minus button to adjust the watt power. When all modifica-
tions are finished, press the mode button to save and exit.
32