INNOCIGS TAROT NANO Bedienungsanleitung Seite 33

INNOCIGS TAROT NANO – USING THE DEVICE
OLED Display
After activating the device, the voltage, resistance value, battery status, tempera-
ture and output power are displayed on the OLED display. If the unit is not in use
for 20 seconds, the display will switch off. You can reactivate the screen by pressing
the fire button.
Press the plus and minus button simultaneously for 2 seconds to turn the screen
display 180 degrees.
Automatic Detection of the Resistance
As soon as the device has detected the connection with a coil, the resistance will be
automatically detected. The resistance is also identified when using a kanthal coil
and the device switches from the TC mode to Watt power.
Locking and Unlocking
To lock the buttons of your Tarot Nano press the plus and minus button simulta-
neously for 2 seconds while the device is in operation. "SYSTEM LOCKED" appears
on the display. Hold down the plus key and the mode key for unlocking in the same
way. The display now shows "SYSTEM UNLOCKED".
31