VAPANION REVENGER Bedienungsanleitung Seite 59

SELECTION & OPERATING OF THE MODES
1.
2. Setting the temperature: In the TC-Ni/TC-Ti/TC-SS/TCR modes, the temperature can be adjusted by
pressing the Plus and Minus buttons. You can choose between the ranges 100°C to 315°C and 200°F
to 600°F. Every press of the plus or minus button will cause the temperature to increase or decrease
by 5°C (or 10°F) respectively. Press and hold the respective button to set the desired temperature
at a higher speed.
3. Locking/Unlocking the resistance: In the TC-Ni, TC-Ti, TC-SS, and TCR modes, you can lock or unlock
the resistance by simultaneously holding down the Minus and Mode buttons for two seconds. A lock
( ) will appear on the display. Replacing the atomizer head does not reset the set resistance.
4. Automatic detection of new atomizer heads: To adjust the temperature when inserting a new
atomizer head, "OLD LOAD: -, NEW LOAD: +" appears on the display. If the atomizer head differs from
the previous one, select the Plus button and the resistance will be newly selected. Select the Minus
button to leave the preset resistance as is.
VAPANION
REVENGER
57