Error Messages & Protections - VAPANION REVENGER Bedienungsanleitung

VAPANION
REVENGER
Setting the CCT Mode (Customized Curve of Temperature)
In the CCT mode, you determine the power curve of the device for temperature controlled vaping. Here,
you can set the desired temperature for the preheating of the evaporator in the first seconds.ode, press
the Mode button three times to set the CCT mode. Hold down the Mode button while pressing the
Plus or Minus button to adjust and confirm the watt output. Press the Mode button again to save your
settings and end the process.
Setting the Bypass Mode
In bypass mode, the direct output voltage is delivered to the atomizer unregulated. The higher the
charge of the battery, the more the output voltage decreases. In this mode, the device can supply power
to heads with a resistance from 0.05 to 5 ohms.
Error Messages & Protections
Low-voltage protection, Short-circuit protection, Low-resistance protection, Overheating protection,
Overcurrent protection, Discharge protection
58
SELECTION & OPERATING OF THE MODES