Yamaha loop factory DX200 Bedienungsanleitung Seite 126

Appendix
MIDI Data Format
0lllllll LLH
0vvvvvvv VVH
: :
11110111 F7H
For parameters whose Data Size is 2 or 4, the appropriate amount of data will be transmitted as
indicated by Size.
11110000 F0H
01000011 43H
0001nnnn 1NH
6DH
01101101
GGH
0ggggggg
MMH
0mmmmmmm
LLH
0lllllll
VVH
0vvvvvvv
: :
11110111 F7H
For parameters whose Data Size is 2 or 4, the appropriate amount of data will be transmitted as
indicated by Size.
2.1.3.1 System1 parameter change
This message sets the System1 block of the voice is sounding currently (see Tables <4-1> and
<4-2>).
2.1.3.2 System2 parameter change
This message sets the System2 block of the voice is sounding currently (see Tables <1-1> and
<1-2>).
2.1.3.3 Current Vocie Common1 parameter change
This message sets the Common1 block of the voice is sounding currently (see Tables <1-1> and
<1-3>).
2.1.3.4 Current Vocie Common2 parameter change
This message sets the Common2 block of the voice is sounding currently (see Tables <1-1> and
<1-4>).
2.1.3.5 Current Vocie FreeEG parameter change
This message sets the Free EG block of the voice is sounding currently (see Tables <1-1> and
<1-7>).
2.1.3.6 Current Voice Step Seq parameter change
This message sets the Step Seq block of the voice(SYNTH Track) is sounding currently
(see Tables <1-1> and <1-8>).
2.1.3.7 Currnet Rhythm Step Seq parameter change
This message sets the Step Seq block of the Rhythm Track (see Tables <4-1> and <4-10>).
2.1.3.8 Current Effect parameter change
This message sets the Effect block (see Tables <4-1> and <4-3>).
2.1.3.9 Current Mulit Part parameter change
This message sets the Multi Part block (see Tables <4-1> and <4-8>).
2.1.4 DX Parameter Change
F0H
11110000
43H
01000011
1NH
0001nnnn
GGH
0ggggghh
0ppppppp PPH
0vvvvvvv VVH
11110111 F7H
2.1.4.1 VCED parameter change
This message sets the VCED block (see Table <2-1> and <2-2>).
2.1.4.2 ACED parameter change
This message sets the ACED block (see Table <2-1> and <2-3>).
2.2 Bulk dump
This device uses only the following bulk dump receiving messages.
[ DX200 NATIVE BULK DUMP ]
1) System1 bulk dump
2) System2 bulk dump
3) Current Voice Common1 bulk dump
4) Current Voice Common2 bulk dump
5) Current Voice FreeEG bulk dump
6) Current Voice Scene1 bulk dump
7) Current Voice Scene2 bulk dump
8) Currnet Voice Step Seq. bulk dump
9) Currnet Rhythm Step Seq. bulk dump
10) Current Effect bulk dump
11) Current Mulit Part bulk dump
12) User Pattern Voice Common1 1...128
13) User Pattern Voice Common2 1...128
14) User Pattern Voice Scene1 1...128
15) User Pattern Voice Scene2 1...128
16) User Pattern Voice FreeEG 1...128
17) User Pattern Voice Step Seq. 1...128
18) User Pattern Effect 1 ... 128
19) User Pattern Multi Part 1 ... 128
20) User Pattern Rhythm Step Seq 1 ... 128
126 21) User Song 1 ... 10
Address Low
Data
End of Exclusive
Exclusive status
YAMAHA ID
N:Device Number
Model ID
Address High
Address Mid
Address Low
Data
End of Exclusive
Exclusive status
YAMAHA ID
N:Device Number
Parameter Group No.
Parameter No.
Data
End of Exclusive
[ DX BULK DUMP ]
1) VCED
2) ACED
3) VMEM
4) AMEM
2.2.1 DX200 Native Bulk Dump
This message sets the special parameters for DX200.
Unlike Parameter change, one message can modify multiple parameters.
F0H Exclusive status
11110000
43H YAMAHA ID
01000011
0NH N:Device Number
0000nnnn
62H Model ID
01100010
SSH ByteCountMSB
0sssssss
0ttttttt TTH ByteCountLSB
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0vvvvvvv VVH Data
: :
KKH Check-sum
0kkkkkkk
F7H End of Exclusive
11110111
Address and Byte Count are given in tables <1-n>.
Byte Count is indicated by the total size of the Data in tables <1-n>.
Bulk dump is received when the beginning of the block is specified in "Address."
"Block" indicates the unit of the data string that is indicated in tables <1-n> as "Total Size."
Check sum is the value that produces a lower 7 bits of 0 when ths Start Address, Byte Count,
Data, and the Check sum itself are added.
2.2.1.1 System1 bulk dump
This message sets the System1 block (see Tables <4-1> and <4-2>).
2.2.1.2 System2 bulk dump
This message sets the System2 block (see Tables <1-1> and <1-2>).
2.2.1.3 Current Voice Common1 bulk dump
This message sets the Common1 block of the voice is sounding currently (see Tables <1-1> and
<1-3>).
2.2.1.4 Current Voice Common2 bulk dump
This message sets the Common2 block of the voice is sounding currently (see Tables <1-1> and
<1-4>).
2.2.1.5 Current Voice FreeEG bulk dump
This message sets the Free EG block of the voice is sounding currently (see Tables <1-1> and
<1-7>).
2.2.1.6 Current Scene1 bulk dump
This message sets the Scene1 block of the voice is sounding currently (see Tables <1-1> and
<1-5>).
2.2.1.7 Current Scene2 bulk dump
This message sets the Scene2 block of the voice is sounding currently (see Tables <1-1> and
<1-6>).
2.2.1.8 Current Voice Step Seq bulk dump
This message sets the Step Seq block of the voice(SYNTH Track) is sounding currently
(see Tables <1-1> and <1-8>).
2.2.1.9 Current Rhythm Step Seq bulk dump
This message sets the Step Seq block of the Rhythm Track is sounding currently (see Tables
<4-1> and <4-10>).
2.2.1.10 Current Effect bulk dump
This message sets the Effect block (see Tables <4-1> and <4-3>).
2.2.1.11 Current Multi Part bulk dump
This message sets the Multi Part block (see Tables <4-1> and <4-8>).
2.2.1.12 User Pattern Voice Common1 bulk dump
This message sets the User Pattern Voice Common1 block (see Tables <1-1> and <1-9>).
2.2.1.13 User Pattern Voice Common2 bulk dump
This message sets the User Pattern Voice Common2 block (see Tables <1-1> and <1-10>).
2.2.1.14 User Pattern Voice Scene1 bulk dump
This message sets the User Pattern Voice Scene1 block (see Tables <1-1> and <1-11>).
2.2.1.15 User Pattern Voice Scene2 bulk dump
This message sets the User Pattern Voice Scene2 block (see Tables <1-1> and <1-12>).
2.2.1.16 User Pattern Voice FreeEG bulk dump
This message sets the Free EG block of the voice is sounding currently (see Tables <1-1> and
<1-13>).
2.2.1.17 User Pattern Voice Step Seq. bulk dump
This message sets the User Pattern Voice Step Seq. block of the voice is sounding currently
(see Tables <1-1> and <1-14>).