Assembling The Fireplace - tepro Laredo Bedienungsanleitung

Assembling the fireplace

1. unpacking the fireplace
Unpack the fireplace and remove
all of the packaging films. Keep the
packaging material out of reach of
children and, after assembly of the
fireplace, dispose of it in accordance
with regulations. During assembly,
pay attention to the illustration of the
fireplace.
2. Join the fireplace and support legs
Using a wing screw (S1), fasten a
support leg (B) to each of the corners
underneath the fire bowl (A).
B
3. Fasten the handle to the spark
screen
Using two Phillips screws (S2) and two
butterfly nuts (T1), fasten the lid handle
(D) to the spark screen (e).
E
P1701031-TEPRO_1069_Laredo_FP_DE_GB.indb 21
A
F
S1
A
S2
D
T1
D
E
C
4. Place the charcoal tub (G) in the fire
bowl (A).
A
5. Put the grill grates and spark screen
in place
Place the two grill grates (C) on the
fire bowl (A). Make sure that the grill
grates snap into place correctly in the
recesses of the side walls. Place the
spark screen (e) onto the fire bowl.
A
6. Assembly is complete
The assembly is completed and the
fireplace is ready to use. Keep the
poker (F) ready for stoking the fire
or distributing the charcoal in the fire
bowl. Disassemble the grill in the
reverse order.
Important: All screws must be tightly
fastened.
t
G
E
C
21
9/6/2017 11:31 AM