Operating; Switching On / Off; Frost Protection Function - Fakir Hobby Bedienungsanleitung

Thermostat

Switching on / off

Frost protection
function
14

Operating

The temperature setting is continuously variable with
the thermostate [C] control.
max. Temperature
min. Temperature
Thermostat knob to the right until it stops. When the
desired room temperature is reached, turn knob slow-
ly as far to the left until the power goes off. If the room
temperature, the heater automatically turns on again.
1. Plug into the mains socket.
2. Switch on the fan heater at the function selector
[B]:
Pos. 0
Pos.
Pos. 1
Pos. 2
3. Select the desired temperature using the
thermostat knob [C] If the ambient temperature is
lower than the desired temperature, the Indicator
light [A] turn ON and the appliance start heating
the room according to the heating level selected.
4. To turn the appliance OFF, rotate the function
selector [B] to position „0"
To avoid that, the room temperature drops below
+5 °C represent (eg prolonged absence), the knob to
the appropriate anti-freeze position.
Pos â
These switch the heater must be at level I or II. The
unit turns on automatically at about +5 °C and again
at about 7 °C out. This allows frost damage.
= rotate right (clockwise)
= rotate left (counter
clockwise)
OFF
cold air (without heating)
heating 1000 W
heating 2000 W
frost gard setting